Callier-Scollard Violins
Craig Scollard

50 E. Green St. Suite 142
Pasadena, CA 91105
(626) 795-2870

Mon, Tue, Wed 10:00-1:00.
Thu, Fri, Sat 2:00 to 5:00

Intercom Access Code, Press:
142 and then the CALL button:

Search
Search Only:

Search Keyword: violin shop

Total: 40 results found.

Page 1 of 2



Repairing a Bow with Breaks Near the Frog Mortise This bow had a couple of significant breaks near the frog mortise. While I don’t have pictures of the clamping process, here’s the complete step-by-step ...
Repairing a Smashed Bass Neck and Scroll This bass had extensive damage: multiple breaks in the scroll and vertical cracks running through the neck and fingerboard. Typically, necks don’t crack this ...
This cello had one of the most challenging cracks to repair—caused by pressure from the soundpost, which caused the back to bulge slightly. The crack also ran diagonally across the grain, adding to the ...
Fixing a Bulging Bow Ring Ferrule Fixing a bow ring ferrule that’s bulging can be a necessary step when rehairing a bow. If left unchecked, the ferrule might not seat properly, affecting the bow’s performance. ...
Summary of the Green Hotel and Its Connection to Callier Violins The Green Hotel, later known as Castle Green, is one of Pasadena’s most iconic historic landmarks. Built in stages starting in the late ...
  This student cello had a significant issue—a large hole in its plywood rib, with fractures spreading through its thin maple veneer. Given the instrument’s value, disassembling it for repair wasn’t ...
... I don't use their method. First you need to get rid of the built in wedge and fill in the tip so you can fit a normal block.<http://b.cs-violin-shop.com/p>     ...
... is an old violin case, first one I've see like this.        ...
This must be the bane of violin, viola, cello or bass repair. The old string are in the way, completely removing them is a waste of time. Creating a loop and hooking that loop around the pegs saves time. ...
When rehairing bows, sometimes you run across a frog where someone has drilled a hole so they can use a pin. Unfortunately they also drill a hole into the mortise so the hair will fit using the ...
Here is one that had no perl on the underslide. I'll try to fake which only takes a few minutes. Here are the steps Scrape any old glue off the slide Put the slide on a piece of Cellophane Cover ...
When rehairing a bow and the frog is not seated correctly on the stick, it neds to be adjusted. Use a pair of needle nose plyers, don't use the bow's screw because you can easily wreck the lining. Usually ...
Sometimes when rehairing a student bow, the tongue is almost completely missing. If that's the case, fitting a wedge will not hold. Usually it's not worth making a new ebony tongue or fitting a new frog. ...
When a slide is stuck or has been glued in, you can inject a little water and a small amount of heat to free up the slide.   Note mixing needles also work good for injecting a little ...
When a block is stuck or glued in, you need to carefully remove the block. Drill a small hole and then whittle away the block from the inside out.
Callier chinrest       Another old Callier chinrest.       An old Callier chinrest.   ...
Here is some information about the shop located at 100 1/2 E. Commerce St. in San Antonio. I still use the band saw that's in the backgound.        ...
18. Google Customer Reviews and Testimonials
( General » Information )
Here is the listing of unedited Google Reviews. Write a Google Review
19. Center Seams
( General » Repairs )
This violin had a horrible repair on the center back seam. There was so much glue on the uneven seam that it looked like someone had glued it with epoxy, ugh. Anyway, I told him that i could see if it ...
Here are the general steps to rehair a bow. Violin bows are still $ 22 if you leave them for one week. I can do them sooner if needed but I charge a little extra. This one week service allows me to spread ...
<< StartPrev  1  2 Next> End>>
Ask Us     Site Map     Top     QR Code